DESCRIPTION
**This listing is for 1 foot pad ONLY! If you want a complete set be sure to add BOTH a front and back footpad separately to the cart.**
Hexagon Foam Grip Tape is a game changer in performance and comfort! This unique blend of geometry, foam, and grip tape allow your feet to lock in like never before! The Hexagons flex and move with your feet giving you comfort and complete control of your board! No more changing out the whole grip tape! Just swap out those worn out areas that are prone to damage saving you time and money! All "FRONT Footpad" orders WILL receive a black protective layer that goes in between the grip tape and sensor as seen in the video. This layer is not needed but is included at no charge. This layer comes in several different color options and has holes perforated through it for ease of installation. This layer is not needed, but is does offer some protection and looks good to! Unfortunately the cost of the adhesive that we laminate to the bottom of the colored stickers is CRAZY expensive. This extra layer is necessary for the sticker to be able to adhere to all the different materials of footpads out there. These are not just your normal run of the mill stickers!
Our Hexagons come in 2 different thicknesses, 2mm & 4mm. We recommend 2mm for the extreme rider. The lower profile of the 2mm makes it less prone to damages caused by the constant barrage of high speed tumbles on jagged rocks. The 4mm is for the rider that wants the ultimate couch feeling under their feet! Which ever size you choose you can be confident that they both perform well and are extremely durable & tough! These Hexagons use our Ignite 24 grit grip tape that is laminated to our specially formulated Shock Absorbing Gel Foam. This foam is dialed in! With over 3 years in R&D and market research in the onewheel industry we can confidently say that you will instantly be hooked! Our adhesive leaves virtually ZERO residue when removed. It can easily be removed while at the same time adhering securely to any style footpad on the market. Including: WOOD, PLASTIC, RUBBER, POLYCARBONATE, URETHANE, ALUMINUM, METAL, & MANY MORE!! We are 100% confident that you will instantly be blown away by the change in the quality of your ride that we have a MONEY BACK GUARENTEE on all our Ignite Grip Tape! Join the 1000's of happy customers that have chosen Ignite Grip Tape as their go to Grip Tape for Onewheels and E-Skateboards!
No matter what foot pad style you have we have you covered! We have measured ALL the most popular REAR & FRONT footpads available to date on the market to ensure the perfect fit!
ALL Ignite Grip Tape/Foam Grip Tape is PERFORATED to insure an easy install without the possibility of causing footpad sensor issues!
All foot pads come with 2 spare Hexagons! These hexagons are 3"x3.5" which is the same shape and size as our IGNITE FOAM GRIP TAPE HEXAGONS FOR E-SKATE & ONEWHEEL that's sold on our website. These are great to have as spares so you can replace the most prone areas to wear and tear without having to replace your whole entire grip tape saving you time and money!
Q&A from Customers:
Q. What causes a board to "Ghost"?(foot pad sensor engages with no rider on the board) A. Several things can cause ghosting. 1st Common problem is from over heating the Foot Pad sensor. This happens when removing the "Stock" grip tape. We recommend using very little heat. Just enough heat to get the surface area of the grip tape to 125F. For any left over adhesive residue we recommend using our "Adhesive Remover". The 2nd Common problem is caused when air is trapped in-between the grip tape and the sensor. This creates an air pocket that puts pressure on the sensor causing it to engaging. ALL Ignite Grip Tape & Foam Grip Tape is PERFORATED to insure no air pockets get trapped in between the sensor and grip tape.
Q. Will the foam tear, where out, or flatten if used by aggressive 200+LBS riders? A. Yes and no... this foam will show some signs of wear but will not tear apart. But it will start to flatten over prolonged use. We recommend our heavier riders to use our 2mm foam for prolonged life.
Q. Will the Images wear off that are printed on the Grip Tape? How do you recommend to clean the grip tape? A. We recommend using a brush. You can add water while brushing to get it looking NEW! When using water we recommend using our Epoxy Foot Pad Sensor Sealant / Plastic & Wood Repair Kit. To insure your FRONT Foot Pad Sensor is properly sealed.
Q. After installing my FRONT foot pad sensor back on my board it will not engage... A. 99 out of 100 times its because you have your tire cable pugged into your foot pad connector and your foot pad cable plugged into your tire cable connector.
Q. Is REMOVAL of the Foam Grip Tape difficult? Do you need a heat gun? A. No, our customized specially formulated 3M adhesive allows for easy removal. You heard that right! We had our 3M double sided adhesive customized so it will stick to wood, plastic, rubber, urethan, & foam. The best part is that all of this was achieved with virtually ZERO residue when removed!
Q. Why is the Foam Grip Tape tearing off in pieces when I am removing it? A. Make sure to pull off our adhesive liner at the same time as the foam. This will insure the foam and grip tape all come off in one piece and not 100's of tiny foam pieces.
Q. Can I install Ignite Grip Tape/Foam Grip Tape on top of my existing grip tape or do I need to remove my old grip tape? A. REMOVE your old grip tape! We NEVER recommend this practice. It is risky and can cause ghosting issues.
SHIPPING & RETURN
DELIVERY
- Free shipping across all products on a minimum purchase of $50.
- Same -day local pickup is available
RETURNS
If you do not like the product you can return it within 15 days - no questions asked. This excludes products that have been used or installed.